Temarai Azten – 3d print files


Temarai is a 2 axis inline head tracking gimbal to be used with a head tracker either built into your FPV goggles or as an external add on device.

SKU: temral_v1_0_0_digital Category:


Product : Temarai

Version code name : Azten

Version # : 20190608_0937

Once purchased you will be able to download the .stl files you require to build Temarai Azten

Two axis gimbal optimised for slope soaring, (Pitch and yaw only).
Designed by RC people for RC people. Designed for fast maintenance on the slope with a minimum of tools and parts.

Tested with the opensource head tracking unit from Dennis Frie on RCgroups


  1. Australian designed.
  2. Low profile to be more aerodynamic and less average pivot point load on landings.
  3. Nose mounted so you can look directly down at the cliff edge, thus
    allowing you to stay in uplift zones.
  4. All mount points and connections are using standard parts or easy to acquire items
  5. Standard rubber bands at main connection point to lengthen the impulse time in heavy landings and as an easily accessible replacement part.
  6. Duct tape connection to outer shell for even load distribution.
  7. Suits RunCam Eagle Pro II.

Included part files for 3d printing :

  1. Camera clamp to suit RunCam Eagle Pro II.
  2. Pitch clamp – bottom
  3. Pitch clamp – Top
  4. Base yaw – bottom
  5. Base yaw – vertical
  6. Shell – inner
  7. Shell – outer.

Parts required to complete project :

  1. Brass Linkage Stopper For 2mm Pushrods: * 3
    HobbyKing SKU: 450001025-0

    1. linkage stopper washers * 6
    2. linkage stopper nuts * 3
  2. 3mm dia * 50mm 316 stainless screw – Philips head countersunk
  3. 3mm dia * 40mm 316 stainless screw – Philips head countersunk
  4. 3mm 316 stainless washers * 2
  5. 3mm 316 stainless Nyloc nuts. * 2
  6. push rods * 3
  7. 2mm galvanised wire push-rods (replacement wire available from most hardware stores)
  8. Servos specification * 2
    1. Either the Corona 939MG Digital Metal Gear Servo 2.7kg / 0.13sec / 12.5g
      HobbyKing SKU: DS939MG ot the
    2. Hextronik MG-14 Digital Aircraft Servo 23T 2.6kg / 0.11sec / 14g
      HobbyKing SKU: MG14
  9. RunCam Eagle Pro II FPV camera.
  10. TX Radio transmitter
  11. RX Radio receiver
  12. Head tracker sensor system.
  13. FPV goggles
  14. Vehicle modified to accept gimbal.
  15. Batteries.
  16. Duct tape
  17. Loctite
  18. Duct tape


There are no reviews yet.

Be the first to review “Temarai Azten – 3d print files”